2026-10-26
The quality of our cartridges are equal to high flow filter cartridges from Pall Ultipleat, 3M CUNO 700 & 740 Series, Parker Fulflo MgaFlow & MaxGuard, Pentair AquaLine, Everblue etc.. LEFILTER pleated high flow filter cartridges are widely used in Sea Water Desalination, RO Pre-filtration, Power Plant Water Treatment, Food and Beverage, Chemical Industry, Process Waters, Injection & Produced Waters etc., help many industrial leaders save much cost with longer working life, high filtration efficiency and good performance.
(1) Large flow rate of single filter element
(2) Low installation cost and low operating cost
(3) The replacement quantity of filter element is small
(4) 1 micron absolute filtration accuracy
(5) High-quality special FDA filter material
(6) The filtering method of in and out, all impurities are intercepted inside the filter element
(7) No metal framework, minimizing the loss caused by discarding
(8) U-shaped sealing groove ensures high filtration efficiency
Initial pressure difference | 0.02MPa |
Replacement pressure drop | 2.4Bar |
Maximum allowable pressure drop | 3.4Bar |
Maximum operating temperatur | 80℃ |
Filtration direction | From inside to outside, without internal skeleton |
Accuracy level | 1.5μm, 3μm, 4.5μm, 10μm, 20μm, 30μm, 70μm |
Filter material | polypropylene glass fibe |
Sealing materials | ethylene propylene rubber, rubber, fluorine rubber, neoprene |
Outer diamete | 6 inches (152.5mm) |
Length | 20 inches (508mm), 40 inches (1016mm), 60 inches (1524mm) |
1. Food industry: filtration of alcohol, beverages and drinking water.
2. Electronic industry: pre-filtration of pure water and ultra-pure water.
3. Petroleum and chemical industry: filtration of various organic solvents, acids, lye, oilfield water injection filtration.
4. Ultrafiltration equipment RO security filtration seawater desalination pretreatment
5. Power plant condensate filtration
6. Water filtration in the biopharmaceutical industry
7. Paint, coating, petrochemical industry
8. Microelectronics film fiber resin
Filter element-rupture resistance verification according to ISO 2941
Filter element-structural integrity according to ISO 2942
Filter element-material and liquid communication compatibility verification according to ISO 2943
Filter element-end load test method according to ISO3723
Filter element-the determination of the fatigue characteristics of the filter element is in accordance with ISO3724
Filter element-Measurement of differential pressure and flow characteristics according to ISO3968
3M | HF40PP001A01,HF40PP001B01, HF40PP001C01, HF40PP001D01 |
P-all | HFU620UY020J, HFU640UY020J ,HFU660UY020J ,HFU620UY045J |
PARKER | MFNP010-40N,MFNP030-40N,MFNP045-40N,MFNP060-40N,MFNP100-40N |
