Folded microporous filter

2023-07-15

Folded microporous filter

The tubular filter element is made of odorless and non-toxic polypropylene, which is made of hot-melt, traction and receiving forming

The pleated microporous filter element has a specification length of 10″, 20″, 30″, and 40″. The structure of the pleated filter layer increases the dirt holding capacity and flow.

Product introduction: To improve the service life, each part is sealed by hot-melt welding technology without adhesive, and the fusion seal forms a complete whole.

Classification

Melt blown filter

1. Specification Length: 10″, 20″, 30″, 40″ Diameter: Outer diameter 60mm, 62mm, Inner diameter 30mm/28mm Accuracy: 1, 3, 5, 10, 20, 30, 50, 75, 100μm Special specifications are available made to order

Adsorption activated carbon

Filter material: extruded activated carbon, carbon fiber

Shell/Core: wrapping, non-woven

Accuracy: 5.10

Port: double open

Uses: pure water preparation, drinking water, beverages, chemicals, etc. dechlorination and decolorization

PP meltblown filter element

This product is a tubular filter element made of odorless and non-toxic polypropylene through hot melting, traction, receiving and forming, and has high pressure resistance.

Melt-blown filter with plastic skeleton to enhance pressure

1. Standard length: 10″, 20″, 30″, 40″

Diameter: outer diameter 60mm, 65mm, inner diameter 30mm/28mm

Accuracy: 1, 3, 5, 10, 20, 30, 50, 75, 100μm Special specifications can be customized

Activated carbon filter

1. Standard length: 10″, 20″, 30″, 40″

2. Diameter: Outer diameter 65mm, Inner diameter 26mm Accuracy: 5, 10μm Special specifications can be customized

3. Characteristic parameters

Working pressure drop: 0.1-0.2kgf/cm²

Maximum pressure: 7kgf/cm2

Maximum pressure drop: 4kgf/cm2

Maximum working temperature: 50°C

Maximum flow: 5L/min (water, △P=0.15kgf/cm2, 10″ filter element)

4. Technical indicators

Surface area ratio: 800-1000m2/g

Iodine adsorption value: 900-1000mg/g

Benzene adsorption capacity: 20-25

Carbon tetrachloride adsorption rate: 50-60

Adsorption value of methylene blue: 13-16ml/g

Ash moisture content: ≤3.5

advantage

Wide applicability; large flow, low resistance, large dirt holding capacity, long service life; adhesive-free hot-melt welding technology is adopted, without bringing in any chemical pollutants.

Field of application

Application fields Electronic industry: high-purity water pre-filtration, etc.

Food and beverage industry: mineral water, wine, fruit juice filtration

Medical and health industry: filtration of liquid medicine, gas, etc.

Chemical industry: organic solvent filtration, etc.